- +91 (0) 240-66444 44
- Email: info@parason.com
Finedge Welded Bar
Finedge Welded Bar
Parason is a well-known manufacturer of Finedge Welded Bar Refiner Plates. These finedge welded bar refiner plates are manufactured using Special Casting & Robot Welding, CNC technology that provides it the maximum uniformity in the refining zone.
Parason Finedge Welded Refiner Plates are welded with special welding technology. The plates will wear uniformly over time, and with the zero draft angle on the bar, with higher bar height, with minimum bar width, hydraulic uniformity is maintained longer. The Parason precision special cast, laser & welding, manufacturing process minimizes groove width variations, which allows the finer bar to optimize low-intensity applications.
Plates life is maximized due to high bar height able to maintain in this technology. Parason offers the Welded Refiner Plates, Tackles & Tri-Conics with an adequate height of the rib to offer more disc life & throughput.
General User Requirement for Finedge Welded Bar Refiner Plates
The basic requirement of finedge welded bar is the strength development of the fiber. Other requirements of finedge welded bar refiner plates are optimization of the product properties, reduction in raw material cost, and reduction in energy consumption.
The making of Finedge Welded Bar Refiner Plates with Special Metallurgy
- SS-304 base
- SS-301 ribs
- SS-17-4 precipitated hardened ribs
- Specialized AWT treatment
Benefits & Advantages of Finedge Welded Bar
- Low Specific Edge Load (SEL)
- Good fibrillation – consistent fiber treatment
- Higher throughput
- Suitable for Hardwood, Softwood & Recycled Fiber
- Low Power Consumption
Special Features of Finedge Welded Bar
- Narrow bar width from 0.8, 1.2, 1.6, 2.0, 2.5, 2.8, 4, 5mm
- High Cutting Edge Length (CEL)
- Zero draft angle on the bar
- More bar height – More life
- Special metallurgy
Photos:
